Doosan Puma TT1800SY
Datasheet verified · checked 17 Nov 2026 · Manufacturer datasheet ↗
| X travel | 165 mm |
|---|---|
| Y travel | 100 mm |
| Z travel | 700 mm |
| C axis | No |
| B axis | No |
| Spindle taper | ASA A2#6 (spindle nose) |
| Spindle speed (max) | 5,000 rpm |
| Spindle power | 18.5 kW (CONTINUOUS; 22 kW at S2 30 min) |
| Tool capacity | 24 |
| Rapid traverse | 20 m/min |
| Weight | 8,800 kg |
| Footprint width | 2070 mm |
| Footprint depth | 3905 mm |
| Factory control | Fanuc |
Notes
**Doosan (DN Solutions) PUMA TT1800SY** — twin-spindle, twin-turret horizontal turning centre with Y-axis. The same machine was sold as the Daewoo Puma TT1800SY in earlier literature. The official product page is https://www.dn-solutions.com/global/product/turning-center/multi-turret/puma-tt-1800-sy.do and corroborates the figures below. **Twin-axis travels.** The published values are for the primary axes: X1 165 mm (X2 190 mm), Y 100 mm (±50 mm), Z1 700 mm (Z2 720 mm). The secondary-axis figures are given here because the catalogue table contains them; only the primary values are published as the model's travels. **Tool stations:** 12 per turret — upper and lower turret, 24 in total. **Rapid traverse:** 20 m/min on X1/X2, 40 m/min on Z1/Z2, 7.5 m/min on Y, 40 m/min on A. **Control:** DN Solutions Fanuc i Plus standard, with Fanuc 31i or Siemens 840D options. **Known inconsistencies in the source brochure, flagged rather than hidden:** (1) the brochure's structure table gives 40 m/min for the Z rapid traverse while its machine-specifications table gives 20 m/min — the manufacturer product page states 40 m/min, so 40 m/min is the Z figure; (2) the brochure's dimensions table gives width 2,070 mm and height 2,080 mm, while the manufacturer product page gives slightly different overall dimensions. The published footprint follows the brochure: width 2,070 mm, length 3,905 mm. **Spindle power:** 22 kW at S2 30-minute duty, 18.5 kW continuous. The published figure is the continuous rating.