Haas VF-3
Datasheet verified · checked 17 Nov 2026 · Manufacturer datasheet ↗
| X travel | 1016 mm |
|---|---|
| Y travel | 508 mm |
| Z travel | 635 mm |
| C axis | No |
| B axis | No |
| Table length | 1219 mm |
| Table width | 457 mm |
| Max table load | 1,588 kg |
| Spindle taper | CT or BT 40 |
| Spindle speed (max) | 8,100 rpm |
| Spindle power | 22.4 kW (MAX RATING (30 hp)) |
| Tool capacity | 20 |
| Rapid traverse | 25.4 m/min |
| Weight | 5,670 kg |
| Factory control | Haas |
Notes
**Base 40-taper VF-3.** Figures are from Haas's own UK VF-3 specification page, captured by the Internet Archive because the original `haas.co.uk/vf3-specs.html` now returns HTTP 404. The current Haas product page (https://legacy-aem.haascnc.com/machines/vertical-mills/vf-series/models/medium/vf-3.html) restates the same travels, table, spindle, taper, tool-changer and rapid figures. **Do not confuse with other VF-3 variants.** Haas also publishes VF-3SS (12,000 rpm), VF-3YT (660 mm Y travel), the 50-taper VF-3 and the VF-3DS. None of those figures are published here — this page is the base 40-taper machine with a 20-station carousel. **Spindle power is a maximum rating**, not a continuous rating. Haas publishes `Max Rating 30 hp / 22.4 kW`; no continuous figure is published for this model. **Not published, because Haas does not state them for this model:** positioning accuracy, positional repeatability, and machine footprint width/depth. The footprint is omitted rather than derived from an operating-envelope drawing whose width/depth labelling cannot be tied to those fields. **Check against the listing.** An individual machine may not match the catalogue standard — for example an auction listing may state a different spindle speed. Where the listing's own reported figures differ from this datasheet, the listing's figures are shown on the listing page and the difference is flagged.